| 
| Component (YPbPr) & S/PDIF Digital Coax/Optical Toslink Audio to HDMI Converter
COMES WITH ONE FREE CABLE OF YOUR CHOICE FROM THE DROP DOWN ABOVE.This Component Video + S/PDIF audio to HDMI converter combines your analog high def and/or progressive scan Y, Pb, Pr (Component) video signals with an S/PDIF Digital Coax or Digital Optical Toslink Audio from your source devices and outputs them in HDMI format. This allows you to connect your legacy Component Video sources to your newer HDMI HDTV's and A/V receivers. No need to replace the high end video player you bought only a few years ago just because it doesn't support HDMI. This Analog to Digital converter provides a perfect interim solution until you decide to move on to the next great high def format.
COMES WITH ONE FREE CABLE OF YOUR CHOICE FROM THE DROP DOWN ABOVE.
INTRODUCTION:
Component video(YPbPr) converter
It converts YPbPr input into HDMI output
Unit has the ability of buffering and amplifying
It achieves long-distance transmission of HDMI signal of more than 15 meters
Solutions for digital entertainment center
HDTV retail and show site, HDTV, STB, DVD and Projector factory
noise, space and security concerns, data center control, information distribution
conference room presentation, school and corporate training environments
Technical specification:
Operating temperature range: -5 to +35?(-41 to +95?)
Operating humidity range:5 to 90 % RH (no condensation)
Power Consumption:10 Watts (max.)
Power Supply:12VDC
Dimensions: 93.8mmW x 26.4mmH x 81.6mmD
Mass:0.58 Kgs
FEATURES:
Easy to Use: Install in seconds, no need for setting
Conversion: It could convert YPbPr and SPDIF audio into complete HDMI.
HDCP compliant
CONNECT AND OPERATE:
Connect the input sources into the unit. (Input cables are optional)
Connect the HDMI device into the HDMI Output slot in the back of the unit -Insert the DC side of 5v power supply into the unit and then connect.
MAIN FEATURES OVERVIEW:
Analog Video Input Front End Interface
Triple ADC with 12 - 140 MHz Sampling Rate
Integrated line locked PLL generates pixel clock from HSYNC
Integrated 5-bit pixel clock phase adjustment for precise sample timing control
Integrated clamp with timing generator
Integrated Brightness & Contrast controls
Integrated precision voltage reference
Compatible with VGA through SXGA RGB graphics signals, and component TV,
DTV and HDTV
Mid-Scale Clamping
Fully Sync Processing
Black and mid-level precision clamp and calibration*
Input video mode status detection
Digital Video Input Front End Interface:
ITU-R BT. 656
8 bits/channel
1 channel
RGB 444
8/10/12 bits/channel
1/ 3 channel
YCbCr 444
8/10/12 bits/ channel
1/ 3 channel
YCbCr 422
8/10/12 bits/ channel
1/ 2 channel
Multi-format digital input up to 200M Pixel/sec
Video data input pins re-order function
Input video mode status detection
YCbCr Color format conversion (422 to 444)
Color space conversion (YCbCr to RGB)
Inverse Gamma Correcting (De-Gamma)
Programmable Data Enable (DE) generator
Programmable Vertical Sync (VS) generator
Programmable Horizontal Sync (HS) generator
Digital Audio Input Front End Interface
I2S input interface Up to 8 channel 192k sample rate
S/PDIF input interface
IEC60958 PCM audio
IEC61937 compressed audio
Digital Data Link Engine
HDMI 1.1/1.0
HDCP 1.1/1.0 with external Key link through micro processor
DVI 1.0
Supports DTV/ HDTV resolutions : 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080p
Supports video optional formats : EIA/CEA-861-B
Analog TMDS Interface
TMDS data link up to 2.0G-bit/s each channel
Including 3 data channel and 1 clock channel
DDC link base on Micro-processor (suggest 8051uP)
Hot Plug detection
TMDS Clock Channel Plug detection
|
|
|
COMPONENT-VIDEO-RGB